How To Adjust Garage Door Tension, Expansion Springs And Cables

Need a Garage Door Professional?

Call Now (720) 586-4435

Having a lockup garage during this era will give its users the convenience of safety and space without having any hassle.

Automatic sheet doors and other lockup doors provide easy access.

Hence, these expensive spacious areas are also requiring special eyes for garage door owners.

Why is it so? It’s because, our safety as well as our convenience might be gone if these lockup doors became dysfunctional.

When that time arises, the safety and comfort will turn into fear as well as distress because the security system of such spacious areas is breached.

This is the main reason why we should be aware of such possibilities in which some of the garage door parts may become unusable and can sometimes cause damages to our vehicles as well as injuries to those who are in the reach of the garage doors.

Garage door springs and cables: How does it work?

One of the benefits of having a personal lockup door is the luxury of calling for the help of lockup door experts.

Thus, in order to get assistance from repairs, maintenances and also improving the security of the lockup doors.

Moreover, it is normal that the owner of such garage doors would be curious about some of the specific parts of such overhead doors.

An example of this is the lockup door spring and lockup door cables, thus, these two parts works simultaneously in order for the lockup door to open and close.

Moreover, we need to understand how to adjust garage door springs and cables in order for us to have a grasp on how and why there’s a need for it to be adjusted.

First is that the spring that are used inside of the lockup doors needs tension coming from the spring in order to pull the door back to its original place.

It needs two springs that are found on the both sides of the door.

Moreover, tension springs and expansion springs are the reason why garage doors are functioning smoothly.

Tension springs are intended for the sideward movements and then the expansion springs are used for the recoiling and the stretching.

On the other side, cables that are found on the lockup doors are composed of strong materials and thus having two purposes; first is that the lifting cables and the later the safety cables.

Lifting cables or the so called wire slings works in order to open and close the lockup door in a smooth manner.

Safety cables on the other hand works simultaneously with the garage door springs.

Moreover, this emergency cable is the main reason why the door doesn’t collapse even if the lifting cable snaps.

By staying with us, you will learn the basic on how to adjust garage door springs and cables.

How to adjust your lockup door springs?

Here are some simple guides on how you do the adjustment.

First step is by gathering supplies such as tools and protective gears.

This will make sure that you’ll be having all the things that you’ll need during the adjustment procedures as well as your protection.

Second step is that you close your garage doors.

This will slightly relax the tension from your springs.

Third is that you find the winding cone.

Winding cone is where you adjust the tension of your garage door springs.

Fourth is by loosening the screws of the winding cone.

This will enable you to maneuver your lockup door springs.

Fifth is to adjust the tension of your lockup springs, after that, you stretch the spring.

Be careful not to apply too much tension when stretching the springs.

Sixth is that you tighten all the screw sets.

Finally, just test the functionality of your garage doors then apply lubricants to the springs to protect it from rust and other dirt as well as to have its maximum efficiency.

How do you adjust lockup door cables?
Here are some of the basic tips that we can give you in order for you to adjust your lockup door cable.

First is by adjusting the cable brackets of the lockup door.

Using the pliers, you can adjust and remove the slacking of the cable by holding the wires then hook it in order to attach it to the frame of your lockup door.

Second is that you loosen the bracket and then you pull and cut the excess cables after tightening the cable.

Finally, you reattach the wirings with the hook into the frame of the lockup doors.

Leave all the worries and the job to us
Clearview Garage Doors are giving different types of services such as garage door repairs in Denver.

And if ever that you are looking for someone who can do garage door installation in Denver then give us a call because we are then best in Denver.

You can definitely see it on our website.

Rate this post

Leave a Message

    Serving Markham For Over 15 Years!

    Repairing any make or model of garage door

    Garage Door Moving Slow

    Extending the life of your garage door

    Garage Door Track Adjustment

    Saving you time and money

    Garage Door Making Noise

    No matter the problem, We fix it

    Garage Door Cable Repair
    Contact Us
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar